Well Treatment

Solid stick foaming agent for gas well deliquification. Reduces brine column surface tension from 70 mN/m to 25–35 mN/m, generating low-density foam (0.1–0.3 g/cm³) lifted by natural reservoir pressure. Typical production uplift: 15–40% gas flow restoration within 48 hours of first treatment.

Downhole treatment sticks for gas well production optimization. Controlled-release formulation delivers active chemical agents at reservoir depth for HPHT environments. Stable up to 90°C (194°F) under downhole pressure conditions.

Triazine-based liquid H2S scavenger for sour gas and crude oil streams. Irreversible chemical neutralisation eliminates H2S to pipeline specification and mitigates sulfide stress cracking (SSC) and hydrogen-induced cracking (HIC). Stable to 90°C (194°F), tolerant to 250,000 ppm TDS.

Standard-grade sodium carboxymethyl cellulose in low-viscosity (LVG) and high-viscosity (HVG) grades. LVG controls fluid loss with minimal added viscosity; HVG is dosed specifically to build viscosity. Cost-effective standard-duty alternative to PAC in freshwater systems.

A broad-spectrum liquid bactericide protecting polymer-based mud systems (xanthan, starch, CMC, guar) from bacterial degradation.

An oxygen scavenger used to protect drill string and casing from oxygen-driven corrosion during WBM operations.

A general-purpose antifoam agent for WBM systems that develop excess foam from surfactant-heavy additive packages.

Used to formulate the internal (dispersed) brine phase of invert-emulsion OBM/SBM systems, balancing water activity against the formation to prevent osmotic water transfer and shale destabilization: essential, non-substitutable invert-emulsion chemistry.

Generates foamed cement for ultra-lightweight slurry designs, used where even extender-based lightweight slurries aren't light enough for the target formation.

A classic total-loss remedy where bentonite is slurried in diesel oil to prevent premature hydration, then pumped into the loss zone, where it contacts formation water and rapidly hydrates into a stiff, hard-to-circulate plug.

Graded, particle-sized salt used as a bridging and weighting component specifically in saturated salt-system drilling.

A standard production-chemical treatment preventing calcium carbonate and barium sulfate scale deposition in producing-well tubing and pipelines.